As a beginner or professional in the welding world, having gas welding regulators is very important for doing welding projects accurately. The argon flow meter helps to regulate the gas of the welding machine so that you can do your gas regulation perfectly.
On the contrary, there are varieties of gas flow meters available in the market. But finding the most suitable one among them is a very tough job. We’ve done a lot of research and prepared the top best argon flow meter for you with their merits & demerits.
Let’s check them out & discover the ideal one.
[table id=2 /]
Best Argon Flow Meter Reviews
We’ve always tried to give you the best of the best products through lots of research and studies. And now in this section, we’ve shared some of the exclusive argon gas regulators with their pros & cons for regulating the gas amount of the welding machine.
1. BETOOLL HW9003 Argon Flow Meter | Argon/CO2 Flowmeter
BETOOLL has come with its brand new argon regulator to keep regulating the amount of gas of a welding machine during welding. It can regulate both argon and CO2 gas. That’s why the welding worker won’t have to face any issues during gas welding.
Besides, it has the feature of showing the pressure of the gas cylinder and also the delivery rate of gas flow. Even it shows how much gas is left in the cylinder from 0 to 4000 psi. Thus it becomes more convenient for use in welding works.
Moreover, this flow meter can be adjusted from 10 to 60 cfh (cubic feet per hour) to show the output flow. Plus, it has a ball that indicates the flow rate moving up and down in the flow tube. Thus the rate of the gas can be read easily.
Apart from these, this flow meter ensures more reliability than other flow meters in the market. It is more reliable, accurate and precise for use as well as ensures strong tightness. For more knowledge, you can check this article argon flow meter for welding.
Most liking feature
BETOOLL HW9003 has no diaphragm that makes it reliable & durable as well. Plus, it carries an adjustable handle by which it is very easy to connect with the machine.
Probable Drawback
This flow metercan serve a superb service in welding works. But it seems a little bit pricey which might be considered a drawback of this regulator.
Key Feature
- Regulates both Argon & CO2 gas
- Shows the pressure & delivery rate of gas flow
- Ensures durability & reliability
- Ensures convenience with adjustable handle
2. SPARC Welders Argon Flow Meter | No Gaskets/Washers
SPARC Welders has launched a brand new gas regulator for making welding works easier than before. This argon flow meter is a great tool for both MIG and TIG welding machines, even both steel and aluminum. Thus it ensures high compatibility and suitability.
This flow meter has a CGA580 bottle inlet connection that can be perfect with argon, helium, nitrogen and CO2 gas bottles. Plus, its outlet connection can fit with both female and male fitting. It also provides a superb barbed fitting.
Unlike other flow-gauge regulators, it also does its job great of showing the gas flow rate of the tube by indicating a moving ball. Plus, this flow meter shows the remaining amount of gas left in the tube by which it is very easy to have an idea of extra gas.
Apart from these, this regulator uses no gaskets or washers to seal the fittings like other flow meters use in the markets. This feature makes it attributable from other flow-gauge regulators and also one of the best gas welding regulators.
Most liking feature
Using no gaskets or washers and providing all necessary elements with two year warranty are considered the most fascinating features.
Probable drawback
This flow meter has come with all premium facilities but it seems quite costly to those who are searching for a budget-friendly gas regulator.
Key Features
- Compatible with both MIG & TIG welding machine
- Adjustable inlet & outlet connection
- Having no gaskets or washers
- Shows the gas flow rate accurately
3. AGPTEK Argon Flow Meter | TIG/MIG Welder
In search of a professional gas flow meter, then AGPTEK gas regulator can be an intelligent choice. Even if it is needed for Miller or Lincoln welders, this flow meter is perfectly suitable for most Argon or CO2 gas tanks and cylinders.
It includes an adjustable output flow from 10 to 60 cfh which is a very good pressure flow. Even it showcases the gas flow rate by a moving ball that goes up when the gas flow rate is high and goes down when the rate is low.
Besides, this regulator can fit with the both male & female barbed fitting. It involves a single piston design that is perfectly applicable with TIG & MIG welders. Mainly, this regulator will be a good one for those who are looking for an economy style gas flow meter.
Most surprisingly, as a professional welder those who want argon gas flow meter which has both regulator and flow meter in the same unit, this regulator can be a great tool for them. This unique feature makes it stunning from others available in the market.
Most liking feature
The durability and easy use of this regulator is considered the most liking feature because it is made with double gauge unbreakable polycarbonate lens.
Probable Drawback
This regulator has no way of connection for a standard insert gas welding hose with fitting besides the barbed fitting.
Key Features
- Suitable for most argon/CO2 tanks
- Unique piston design applicable for TIG & MIG welders
- Combination of both flow meter & regulator
- Durable and easy to use
4. ZISS Argon Flow Meter | Full Copper
ZISS has introduced a very amazing argon flow meter with us for professional TIG & MIG welding applications. It has the excellent capability of reducing the gas pressure level as well as controlling the pressure rate of gas.
This flow meter has a high quality pressure gauge that shows how much extragas is left. It even shows the flow rate of the gas tube by ranging from 0 to 4000 psi. Plus, it is compatible with a high range of gases including CO2.
Besides, this gas regulator provides high durability as it is made of full copper and also designed precisely. So, it can give a long lasting welding experience. In fact, this regulator can be a great choice for a welding beginner.
Moreover, the regulator has CGA-580 inlet connection including a female 5/8 UNF-18RH fitting and gas hose. Most of the regulators in the market do not have such high connection facilities. That’s why it will be the best argon flow meter for any welding, cutting or industrial works.
Most liking feature
This regulator has included a 10ft quick hose connect fitting that enables the gas tanks remaining at a safer distance from welding projects.
Probable Drawback
This regulator looks very great but sometimes it has the issue of inlet leaking that might be a demerit of this regulator.
Key Feature
- Reduces & controls the gas pressure
- Copper body gives long lasting welding experience
- Ensures inlet connection with long hose fitting
- Compatible with high ranges of gases besides argon
5. YaeTek Argon Flow Meter | Gauge Regulator
YaeTek has presented a spanking new Argon gas regulator to stay regulate the number of gas of a welding machine during welding. It will regulate each Argon and CO2 gas. That’s why the regulator won’t need to face any complications throughout gas regulation.
Besides, it possesses a feature of showing the pressure of gas cylinder and conjointly the delivery rate of gas flow. Even it shows what proportion gas is left within the cylinder from zero to 3500 psi. Therefore it becomes additional convenient to be used in welding works.
Moreover, this flow meter indicates the adjustable gas flow rate from 10 to 60 cfh. It also includes CGA-580 fitting that fits with most gases like nitrogen, helium etc. besides argon & CO2. Plus, its full body is made of copper that sustains its longevity.
Apart from these, this regulator can fit with both a female 9/16”X 18 screw and 5/8”X 18 male screw. It also provides an adaptor and a barbed fitting. That makes it more distinguished from other gas regulators in the market.
Most liking feature
YaeTek utilizes no diaphragm that sustains its reliability & sturdiness additionally. Plus, it has an adjustable handle by that it’s terribly simple to attach with the machine.
Probable drawback
Though this flow gauge regulator provides more accuracy in gas regulation but it sometimes leaks the gas tanks which might be very disturbing to welders.
Key Features
- Compatible with most gases
- Fits with both male & female screw fitting
- Ensures reliability & sturdiness
- Easy to use & more convenient
Things to Consider Before Buying Argon Flow Meter
As a beginner in welding projects, you have to be careful about some important things before buying a gas regulator. In this section, we’ve discussed those things that’ll be a great help for you to find one of the best gas welding regulators. You can check out our picks for Grit Sandpaper for Drywall as well.
Reading Capability
Perfect capability of gas flow reading is the main feature of an argon flow meter. The meter must have the ability to show the pressure and delivery rate of the gas tube correctly. If it doesn’t show the proper gas regulation, then there will be no use of buying one.
Moreover, the flow meter must have the proper pressure range and gauge. That’s why make sure that the selected flow meter is very easy and convenient to read.
Compatibility
Compatibility is the most important aspect of an argon gas flow meter. The argon flow meter must have to be compatible with most gases besides argon gas such as nitrogen, helium, CO2 etc. Its main function is to regulate the gas flow rate during welding.
So, in this case, if it is not compatible with the most available gases, then what’s the point of buying a gas regulator then? So you have to be sure of this issue.
Durability
The durability and reliability of the flow meter should be top class. The copper body and unbreakable polycarbonate lens makes the regulator more durable and reliable. Thus it can be used for heavy welding, cutting, chemical; industrial works for a long period.
Easy Connection
Most importantly the connection of the gas regulator is the very prominent feature. The regulator must have both inlet & outlet easy fitting connections. The connection must have to be very easy and quick so that there will be no issues during gas regulation.
Budget
Before buying something, budget is one of the most significant elements. And you obviously don’t want to waste your money buying the wrong product. In terms of buying a gas regulator, budget is very important.
We’ve discussed all the budget-friendly gas regulators above. So before buying a regulator, you should take care that the measurements are budget friendly.
FAQs – Frequently Asked Questions & Answers
1. Will this work for helium gas?
Yes, it will.
The regulator is not only compatible for argon gas nuts but also for others like helium gas. It provides extra barbed fitting and hose connection. Thus it is very convenient for use of most gases including helium.
2. Will it be able to fit with a canaweld TIG welder?
Yes, obviously it will.
The regulator is perfectly okay with any TIG & MIG welding applications. It excellently shows the pressure rate of gas. So it will easily fit with a canaweld TIG welder.
3. Can I use it for my Lincoln 140?
Yes, you can.
If you are an owner of a Lincoln 140 MIG welding machine, then you can definitely use the argon gas regulator. It has all the capability of showing the gas regulation in detail.
4. How can I get the argon flow meter?
For getting the superb and high quality argon gas flow meter, you have to first check the reading capability, quick connection, mechanism, service warranty etc. ingredients. If these things are okay, then you’ll be able to get your desired argon gas welding regulator.
Final Words
Gas regulators are one of the most paramount elements for maintaining welding projects and applications. If the gas regulator doesn’t serve its best service, then you will have to face many complications in regulating gas consistency.
That’s why make sure that the flow meter can show the pressure and delivery rate exactly with other features like easy use & connection, durability, portability, high quality service etc. After this, you’ll be handed over the best argon flow meter.
Have a great welding experience!
