The bumper car is a car that is loved by adults and kids, this is one of the most popular, iconic, and long-lasting amusements out there. A firm named Dodgem first introduced The bumper car in the early 1920s, this has been a humorous and unexpected method to release pent-up energy for over a century.
Almost all of us are familiar with bumper cars but have you ever wondered how Bumper Cars Work? Our curious mind wants to know more about everything. So here you will get all the necessary information about the Bumper cars.
What are the Bumper Cars
Bumper cars have been present since the 1920s, and the attraction was extremely popular from the 1920s until the 1950s. A bumper car is an automobile built to be used in the bumper cars amusement park attraction, in which many cars are let loose on an enclosed track.
The aim of bumper cars is to go around the track, with the vehicles’ safety mechanisms protecting passengers in the case of a collision. However, most riders prefer to spend their time on the ride smashing one another.
Type of Bumper cars
Bumper cars come in a variety of styles, but they always run on electricity. The ancient, iconic bumper cars had poles attached to the back of the automobile that carried power down a line to the car. Other types of bumper cars employ an electric floor that activates the vehicles via a simple circuit system beneath the cars.
Many bumper cars, however, now employ rechargeable batteries, eliminating the requirement for electricity on the floor or via connecting cables or poles.
The battery-powered automobiles will have a battery that allows them to move. When the automobile is turned on, the complete circuit in the car becomes active. Grid bumper vehicles are composed of two distinct grids: the ceiling grid and the floor grid. The way they pull electricity to automobiles will differ, and you should be aware of this.
How Do Bumper Cars Work
These cars are based on physical concepts. Bumper cars are particularly entertaining because of Isaac Newton’s law of motion. The action-reaction principle is what causes the automobile you strike to bounce in the other direction.
According to the third law of motion, when one body collides with another, the second body begins an equivalent force in the opposite direction. As a result, when one bumper vehicle collides with another, they might both bounce away from each other.
At the funfair, numerous children and adults riding on cars surrounded by rubber or inflatable PVC and colliding with one another have been observed. It is already mentioned bumper cars are powered by electricity and use one of three different power supply systems.
A bumper car with a ceiling grid receives power from the grid through a hot rod, and the current operates a motor in the bumper car body. When the engine is turned on, it causes the wheels to revolve through a belt.
Bumper Car
The goal of most bumper car rides at amusement parks is to collide with other bumper cars. Manufacturers pad the outside of bumper car frames with large rubber bumpers to prevent damage and protect the bumper car drivers;
The large bumpers deactivate the force of the impact, then transfer only minimal shock to the car and its occupants. When two bumper cars hit, the big bumpers absorb the impact while allowing an inertial change to the occupants. This abrupt shock offers a safe excitement for the bumper car driver and passenger.
Seat Belts of Bumper cars
Seat belts are one of the most important parts of bumper cars. This is the most crucial part for the car. Amusement park management generally requires bumper car riders to wear seat belts as the rider will face sharp and frequent jolts.
Bumper car makers generally add five-point safety harnesses comparable to those seen in professional racing cars instead of the conventional three-point seat belts found in road cars.
These padded safety straps hold the driver and absorb the shock of unexpected direction changes, preventing him from being ejected onto the car arena.
The driver of the Car
While electricity powers the motor that drives the bumper car forward or backward, the driver must retain some control over the vehicle’s motion. How the car is going to go depends on the driver. To do this, bumper car manufacturers install at least one steering wheel in each vehicle.
Manufacturers link the steering wheel directly to the one or maximum two directional wheels installed under the car. Because the bumper cars do not require complicated steering capabilities seen in other on road automobiles.
When the driver cranks the steering wheel, a connecting rod adjusts the angle of the directional wheels, allowing the automobile to turn when the driver adds forward or backward power.
Depending on the style of bumper car, the car may have two-directional wheels attached on either side of the car’s underbelly or a single directional wheel located in the center of the car’s bottom, similar to a tricycle.
Final Words
Before riding bumper cars it is important to have basic knowledge of how bumper cars work. The process is pretty simple but brilliant. And this is pretty safe to ride as it is made for children as well. So come out and play with bumper cars. If you have any further questions, let us know.
Related Post:
